goglib.blogg.se - Dashcam viewer only displays end of clip gps

#Dashcam viewer only displays end of clip gps install
#Dashcam viewer only displays end of clip gps pro

Once the car starts on, the camera will automatically turn on and start recording.

The camera will auto power on and start recording.

Insert the Car Charger into your vehicle’s cigarette lighter port.

Use the rear camera cable connecting the rear camera to the rear lens port of the device, carefully route the cable and tuck it under the trim.

#Dashcam viewer only displays end of clip gps install

Install the bracket on the rear dash cam, tear off the rear camera 3M sticker and stick it on the back windscreen.With the Mini USB Cable, connect the supplied Car Charger to the Camera into the device power interface.Carefully route the power cable around the windscreen and tuck it under the trim.Tear off the 3M tape, stick the Front Dashcam behind the rearview mirror, which is the suggested position, to make sure the driver’s front view is no impact.Thoroughly clean the windshield using water or alcohol, and wipe clean with a dry cloth.Install the bracket on the front dashcam.Please do not take the card out when the camera is recording in case the important video files missing.ģ.3 Installing the camera onto your windshield.The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card.(If you format it on the computer, please search online on “How to format 64GB micro SD card to FAT32”.) Then the card will be formatted successfully. Then choose the OK section and wait for a few seconds. If it says ‘NO SD Card Inserted !’ or ‘error card please format’ here, please press the UP button and then press the M button to access the menu, go ‘system setup’ and choose ‘Format SD Card’. NOTE: When using a 64GB MicroSD card, please format it to FAT32 on the camera first. Please be sure to buy a genuine Samsung card. Samsung Micro SD cards would only be made in either Korea or the Philippians.

#Dashcam viewer only displays end of clip gps pro

We recommend Samsung Pro Endurance cards or Samsung Evo cards. Please use a genuine MicroSD memory card with a speed rating of class 10 or higher. To remove the card, power off the camera first too. NOTE: To insert the card, power off the camera first, then push the card into the slot until it clicks again, otherwise the dashcam will say goodbye and shut off. NOTE: When charging via the computer with the mini USB cable, “Mass Storage” and “Power On” will be displayed on the camera screen, please select“Power On” to charge the dashcam.ģ.2 Installing memory card ( Please Don’t use Sandisk SD card, Recommend Samsung Pro Endurance Card or Samsung Evo Card ). Ensure the Mini USB Cable and Car Charger are well connected Charge using the supplied USB Car Chargerī. LED Indicator Red light blinks on the UP button Camera is recording The red light on the Down Button Camera is Charging The red light on the Rear Camera LED Status indicator The rear camera is recording.ģ.1 Before first use, charge the camera for 4 hours.Ī. 21 LED Status Indicator The red light once connects the front camera. 20 Lens knob Turn the knob to adjust the camera angle. 19 Rear camera Click Socket Connects to the rear dash cam bracket. 18 Rear Lens Rear F1.8 160°wide camera for video recording. 17 Image Flip Switch Toggle this switch to select the horizontal direction of the rear lens display as positive or mirror. 16 Rear Camera Lens Port Use the rear camera cable connecting the front camera. 15 Power Button Power ON/OFF Short press to screen off / on. 14 Reset Button Press to force reset the device. 13 Rear Lens Port Use the rear camera cable connecting the rear camera. 12 USB port Use the car charger to supply DC 5V power for the device. 11 Front Camera Lens Front-facing F1.47 170°wide camera for video recording. 10 Speaker Delivers sound during video playback. 9 Front dashcam clip socket Connects to the dashcam bracket.

8 Radiator To prevent the dashcam from overheating in a working state. 7 OK Button Confirms the action Manually locks the currently recording video clip following an emergency or to preserve important videos Snapshot Long press to enter Parking Mode when the camera is recording. 6 Down Button Move selector down Microphone on/off.įast forward when playing back videos. For the dual-lens version, press it to switch 3 screen view option. 5 Screen Switch For the single-lens version, press it to change the resolution. 4 Up Button Stop/Start the video recording Move selector up Slow forward when playing back videos. 2 MicroSD Card Slot Provides expandable storage.

Description 1 Microphone Records clear audio with the video footage.